Epoxy Tile Grout Application Guide: Mixing, Installation & Cleaning

Q: Which tile adhesive should I use for a premium finish?

For ceramic tiles use JKTylo 111 Classik Grey, for vitrified tiles and walls use JKTylo 211 Anti-Skid Grey, for light marble use JKTylo 606 Platinum White, and for plywood or metal use JKTylo 909 PU Anchor.

To achieve a professional and long-lasting finish for your tiling project, it is essential to understand the correct application of advanced materials like JKTylo 2K Eazy epoxy grout and specialized adhesives, such as JKTylo 111 Classik Grey.

How to Use JKTylo 2K Eazy Epoxy Grout

JKTylo 2K Eazy is a high-performance, two-component epoxy grout designed for maximum durability. It is specifically engineered to be UV resistant, stain-resistant, and water-resistant, making it an ideal choice for both internal and external applications.

1. Preparation: Joint Cleaning

· Ensure the tile adhesive has completely cured, which typically takes at least 24 hours.

· The tile joints must be thoroughly clean, dry, and free of any debris, dust, or excess adhesive.

2. Mixing: The Precision Stage

· JKTylo 2K Eazy is a two-component system consisting of a resin and hardener.

· Use a slow-speed mechanical stirrer (less than 300 RPM) to blend the components until you achieve a smooth, uniform, and lump-free paste.

· Do not add water to the mixture.

· Always wear a mask and gloves during this process.

3. Application: Filling the Joints

· Apply the grout firmly into the tile joints (up to 12 mm wide) using a rubber trowel or spatula to ensure full penetration.

· Hold the float at a 90° angle and pull it at a 45° angle diagonally across the joints to avoid pulling out the material.

· Epoxy has a limited working time (pot life is typically 40–60 minutes), so only mix what can be applied quickly.

4. Cleaning: Removing Excess Grout

· Cleaning must be done shortly after application to prevent a permanent residue on the tiles.

· Once the grout is touch-dry, use a wet, soft sponge to remove excess material from the tile surface.

· Ensure the joints are filled properly and no grout is left on top of the surface.

Best Adhesives for a Premium Finish

The JKTylo® range offers specific adhesives for different tiling needs to ensure an “Unshakeable Power” bond:

· Standard Interior Floors (Ceramic Tiles): JKTylo 111 Classik Grey Adhesive is the best choice for everyday projects involving porous tiles like ceramic or clay on internal floors and walls.

· Vitrified Tiles and Walls: JKTylo 211 Anti-Skid Grey Adhesive is ideal for non-porous vitrified tiles and features anti-skid properties for vertical applications.

· Light-Colored Tiles and Stones: For white marble or light stones, JKTylo 606 Platinum White Adhesive is essential to prevent shadowing and maintain the material’s natural color purity.

· Challenging Substrates: For bonding tiles to plywood, metal, or glass, use JKTylo 909 PU ANCHOR, a highly flexible polyurethane-based adhesive.

FAQs

1. What is epoxy tile grout and why should I use it?

Epoxy tile grout is a high-performance grout made from resin and hardener. It offers superior durability, stain resistance, water resistance, and UV protection, making it ideal for kitchens, bathrooms, swimming pools, and outdoor tiling.

2. How do I mix JKTylo 2K Eazy epoxy grout correctly?

JKTylo 2K Eazy should be mixed using a slow-speed mechanical stirrer (below 300 RPM) by blending the resin and hardener until a smooth, lump-free paste is formed. Do not add water. Always use gloves and a mask while mixing.

3. How long should I wait before applying epoxy grout after tile installation?

You should wait at least 24 hours after tile installation to allow the tile adhesive to cure completely before applying epoxy grout.

4. How do I clean epoxy grout from tile surfaces after application?

Once the grout becomes touch-dry, clean the tile surface using a wet, soft sponge. Cleaning must be done immediately after application to prevent permanent epoxy residue on the tiles.